The die-casting industry is one of the important supporting industries of the automobile industry, and it has always been closely related to the development of the automobile. In recent years, the rapid development of the automotive industry has driven the rapid expansion of the die-casting market and has given it broad development prospects.
Product under test: automotive controller (die casting)
The automobile die-casting parts in the prior art usually adopt ordinary die-casting technology for the production of auto parts. At present, the ordinary die-casting technology produces die-casting parts, which are prone to pores in the organization and lead to undesirable phenomena. How to test the automobile controller (die-casting) Air tightness has become a problem that plagues practitioners in the die casting industry. Hi Ruisi Technology has solved this problem for manufacturers in the die casting industry.
Air tightness test of automobile controller (die casting)
The current automotive controllers (die-casting parts) need to reach the IP67 protection level. After taking into account the needs of customers, Hi Ruisi Technology has used the following equipment and solutions for it:
Equipment used: Heruisi HC classic series air tightness testing equipment
Solution: Use direct test method, test pressure 10KPA, inflation time 10S, voltage stabilization time 3S, test time 3S, leakage limit 0.3KPA. Design the test mold and tooling according to the structure of the automobile controller, put the product on the mold as required, start the upper mold and press to block the opening and the top, and the side cylinder pushes sideways to block the side line holes to form a seal inside the product Cavity. The instrument enters the test program to inflate, stabilize, and test the inside of the product, and detect whether the product has leaks by monitoring the change in the internal air pressure of the product. The system automatically determines whether the product is OK or NG according to the set parameters.
Heruisi Automobile Die Casting Air-tightness Testing Equipment
There are many existing air tightness testing equipment for automobile controllers (die castings), but these fail to meet the production and use requirements of manufacturers. Hi Ruisi Technology HC classic series air tightness testing equipment can keep up with the efficiency required for testing. , To reach the product protection level required by die casting manufacturers, and increase its service life.
Test parameters of Heruisi air tightness test equipment
Each instrument and equipment of HiRuisi Technology will undergo harsh environmental aging tests and calibrations to ensure the quality of product shipments. With cutting-edge equipment and experienced talent team, Hai Ruisi has the ability to quickly deliver a complete set of equipment with guaranteed quality and quantity in 10-15 days.